Debug Mode - Teltonika FMA110 User Manual

7 Debug mode

FMA110 is able to transmit its current state when connected to PC using USB cable. It is
used to detect errors and provide information to possible solutions when operating as
unexpected. Download Terminal from:
http://avl1.teltonika.lt/Downloads/Software/Terminal.zip.
After launching terminal choose baud rate 115200 and hardware control – none. Select
COM port which is assigned to "Virtual COM Port". Click on 'Start Log' button and save a new file.
Then click 'Connect' to start receiving messages from FMA110.
Also you can log NMEA data directly. To get NMEA data, simply enter the following
command into the command field: .log_nmea:1$0a.
Figure 52 Terminal window for logging
61