Table of Contents
Advertisement
FMA110 Configurator is divided into main areas: 1 – main button area, 2 – information
area, 3 –settings menu, 4 – parameters and values menu, 5 – recommended configuration values.
Button 5 is used to change between configuration modes.
Main Buttons description:
'Connect' – connects device
'Load' – reads configuration parameters from FMA110 Flash memory.
'Save' – saves configuration parameters to FMA110 Flash memory.
'Load Defaults' – loads default FMA110 settings that later can be modified. This procedure
must be performed before entering new parameters.
'Save to File...' – allows user to save currently entered settings to .XML file, for later usage.
'Load from File...' – allows user to load configuration saved in .XML extension file.
'Reset device' – reboots FMA110 and displays processor firmware version.
Additional Buttons description:
'SIM PIN' - allows to enter PIN code if inserted SIM card has activated PIN code security.
Note that PIN code can be entered 2 times.
'Add Keyword' / 'Change Keyword' / 'Switch Security Off'– buttons are used to protect
configurator from unauthorized access to configuration.
Keyword is 4 – 10 symbol length. If keyword is set, every time user reconnects FMA110 to
USB port, user will be asked to provide valid keyword when connecting FMA110 to configurator.
User is given 5 attempts to enter keyword. After entering valid keyword, counter resets to 5.
If user disconnects FMA110 using 'Disconnect' button and does not disconnect from USB
port, after reconnecting using 'Connect' button, configurator does not ask for keyword.
Figure 18 Advanced Configuration window
28
Advertisement
Table of Contents
