Teltonika FMA110 User Manual page 32

Phone numbers have to be written in international standard, without using "+" or "00"
signs in prefix. If no numbers are entered, configuration and sending commands over SMS are
allowed from all GSM numbers.
SMS data sending settings – enable or disable periodic data and event SMS usage. This
setting does not affect replies to SMS request messages – answers are always sent back to
sender telephone number.
FMA110 can send binary SMS with 24-coordinates-in-one-SMS. It is used in areas where no
GPRS coverage is available. Module collects data and sends to server binary SMS containing
information about last 24 collected points. SMS sending schedule is set in SMS Week Time tab.
24-Coordinates SMS decoding is described in device protocols documentation. Please contact
Teltonika sale manager to find out more about protocols documentation purchase.
Note: A mobile phone will not understand SMS with binary code, so sending it to
a mobile phone is useless. When sending a binary SMS to a phone number, which
is a server phone number, the server can interpret and understand binary code,
so the data can be read and you can view it on the server.
SMS login and password and authorized number list are used to protect FMA110
module from unauthorized access. Module accepts messages only from a list of
authorized numbers and with proper module login and password. Numbers must
be without "+" or "00" prefix. If no authorized numbers are entered, module
accepts messages from all numbers.
Figure 22 SMS configuration
32