Teltonika FMA110 User Manual page 38

Note: Keep in mind that FMA110 operates in GMT:0 time zone, without
daylight saving.
FMA110 is able to collect records using three methods at the same time: time, distance and
angle based data acquisition:
Time based data acquiring (Min. period) – records are being acquired every time when defined
interval of time passes. Entering zero disables data acquisition depending on time.
Figure 29 Time based data acquiring example
Distance based data acquiring (Min. distance) – records are being acquired when the distance
between previous coordinate and current position is greater than defined parameter value.
Entering zero disables data acquisition depending on distance.
Figure 30 Distance based data acquiring example
Angle based data acquiring (Min. angle) – records are being acquired when angle difference
between last recorded coordinate and current position is greater than defined value. Entering
zero disables data acquisition depending on angle.
Figure 31 Angle based data acquiring example
Speed based data acquiring (Min. speed delta) – records are being acquired when speed
difference between last recorded coordinate and current position is greater than defined value.
Entering zero disables data acquisition depending on speed.
Figure 32 Speed based data acquiring example
38