3.2.3
Installing drivers
Extract and run VCPDriver_V1.3.1_Setup.exe. This driver is used to detect FMA110 device
connected to the computer. Click 'Next' in driver installation window (figures below):
This will launch device driver installation wizard. In the following window click 'Next'
button again:
Setup will continue installing drivers and will display a window about successful process at
the end. Click 'Finish' to complete setup:
You have now installed drivers for FMA110 device successfully.
Figure 2 Driver installation window
Figure 3 Driver installation window
Figure 4 Driver installation window
15