I/O#1 Logic Operand (Id=1304); I/O#1 Averaging Length (Id=1305) - Teltonika FMA110 User Manual

Minimum Maximum
value value
-2147483647 2147483647
8.7.5

I/O#1 logic operand (ID=1304)

Parameter defines when event is sent: 0 – on range exit, 1 – on range entrance, 2 – both,
3 – monitoring, 4 – hysteresis, 5 – on changes.
Minimal Maximum
value value
0 4
8.7.6

I/O#1 averaging length (ID=1305)

Parameter defines I/O property sample length to average. If no averaging needed default
value is 1.
Minimum Maximum
value value
0 2592000
Other I/O property elements can be configured in same logic. All I/O element parameters
are listed in the next table.
Recommended
value
I/O#1 property parameter (ID=1300)
0
I/O# logic operand (ID=1304)
I/O#1 Averaging length (ID=1305)
Recommended
value
3
I/O#1 Averaging length (ID=1305)
Recommended
value
1
I/O#1 Logic operand (ID=1304)
Goes with (depends on)
parameters
I/O#1 priority (ID=1301)
I/O#1 High level (ID=1302)
Goes with (depends on)
parameters
I/O#1 property parameter
(ID=1300)
I/O#1 priority (ID=1301)
I/O#1 High level (ID=1302)
I/O# Low level (ID=1303)
Goes with (depends on)
parameters
I/O#1 property parameter
(ID=1300)
I/O#1 priority (ID=1301)
I/O#1 High level (ID=1302)
I/O# Low level (ID=1303)
Value
type
S32
Value
type
S8
Value
type
S32
85