Replacing The Transfer Roller Unit - Konica Minolta bizhub C658 Service Manual

bizhub C658/C558/C458/C368/C308/C258
7.5 2nd transfer/separation section
7.5.1 Replacing the transfer roller unit
(1) Periodically replacing parts/cycle
• Transfer roller unit : Every 300,000 sheets (bizhub C368)
• Transfer roller unit : Every 300,000 sheets (bizhub C308)
• Transfer roller unit : Every 300,000 sheets (bizhub C258)
(2) Removal procedure
1. Open the right door and the regist unit.
[2]
[1]
(3) Reinstall procedure
[2]
[1]
3. Close the right door.
7.6 Toner collection section
7.6.1 Replacing the waste toner box
(1) Periodically replacing parts/cycle
• Waste toner box: Every 33,000 counts (bizhub C368)
• Waste toner box: Every 30,000 counts (bizhub C308)
• Waste toner box: Every 30,000 counts (bizhub C258)
(2) Removal procedure
1. Open the front door.
[2]
[1]
[1]
4. Clean the surface around the waste toner collecting port.
F.7.6.2 Cleaning of the area around the waste toner collecting port
F PERIODICAL MAINTENANCE > 7. Periodical maintenance procedure bizhub C368/
2. Unlock the lock levers [1] of the transfer roller unit (at two places).
3. Holding onto the lock levers [1] (at two places), remove the transfer roller unit
[2].
1. Holding onto the lock levers [1] (at two places), mount the new transfer roller
unit [2].
2. Lock the lock levers [1] (at two places).
NOTE
▪ Make sure that the levers are locked in position both at front and
2. Unhook the waste toner box fixing levers [1] and remove the waste toner box
[2].
[1]
3. Take out the cap [1] from the new waste toner box package, and attach it to
the old waste toner box.
NOTE
▪ After removing the Waste Toner Box, quickly install the cap. If the
F-32
rear.
Waste Toner Box is tilted, waste toner may spill.
C308/C258