Konica Minolta bizhub C658 Service Manual page 458

bizhub C658/C558/C458/C368/C308/C258
[1]
[2]
[1]
[1]
[2]
[1]
[2]
15. To reinstall, reverse the order of removal.
6.7 Disassembly/reassembly procedure (Fans)
6.7.1 Power supply cooling fan (FM1)
1. Remove the left cover.
G.6.2.16 Left cover
2. Remove the exit cover.
G.6.2.17 Exit cover
[1]
[1]
11. NOTE
[2]
12. Remove two screws [1], and remove the switchback motor assy [2].
13. Disconnect the connector [1], and remove the paper exit deceleration clutch
14. Remove the E-ring [1], and remove the clutch [2].
3. Remove six screws [1], and remove the DC power supply protective shield [2].
[2]
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
▪ When installing the gear, align the raised area of the spring [1] with
the hole in the frame [2].
assy [2].
G-158