Konica Minolta bizhub C658 Service Manual page 423

bizhub C658/C558/C458/C368/C308/C258
[2]
[1]
[3] [1]
[4] [2]
[2] [4]
[1] [3]
[2]
[1]
14. To reinstall, reverse the order of removal.
6.4 Disassembly/reassembly procedure (Boards)
6.4.1 CCD board (CCDB)
(1) Removal procedure
1. Remove the scanner right cover.
G.6.2.2 Scanner right cover
2. Remove the original glass.
G.6.2.11 Original glass
[1]
[2]
[3]
10. Disconnect the connector [2], and remove the harness from the wire saddle [3]
11. Remove the E-ring [1], and remove the flange [2].
12. Remove the belt [4] from the gear [3], and remove the gear [3].
13. Remove three screws [1], and remove the exit unit [2].
[1]
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
7. Remove two screws [1], and remove the cover [2].
8. Disconnect the connector [3].
9. Remove the screw [1].
and the edge cover [4].
3. Remove five screws [1], and remove the CCD board protective shield [2].
G-123