Konica Minolta bizhub C658 Service Manual page 637

bizhub C658/C558/C458/C368/C308/C258
8.16.6 Finisher (FS-536/FS-536SD)
• When transporting the finisher, make sure to push it to the
direction as shown in the illustration. (to prevent turnover
during transportation)
1. Remove the DF cable cover.
G.6.2.22 DF cable cover
[1]
3. Open the front door.
[2]
[3]
[4]
[1]
7. To reinstall, reverse the order of removal.
CAUTION
[2]
[1]
[2]
2. Remove the cable tie [2], and disconnect two connectors [1].
4. Remove the screw [1], and pull out the lever [2].
NOTE
▪ At the time of the finisher installation, make sure that the screw hole
[3] locates within the scope of the mounting hole of the lever [4].
5. Disconnect the connector [1].
6. Remove the finisher [2] from the main body.
G-337
G DISASSEMBLY/REASSEMBLY > 8. Option