Konica Minolta bizhub C658 Service Manual page 295

bizhub C658/C558/C458/C368/C308/C258
24.1.3 Replacing the paddle (FS-536/FS-536SD)
(1) Periodically replacing parts/cycle
• Paddle: Every 2,000,000 counts
(2) Procedure
1. Remove the finisher from the main body.
Finisher (FS-536/FS-536SD)
2. Remove the front door of the finisher.
G.8.16.2 Front door (FS-536/FS-536SD)
3. Remove the front upper cover of the finisher.
G.8.16.3 Front upper cover (FS-536/FS-536SD)
4. Remove the rear cover of the finisher.
G.8.16.1 Rear cover (FS-536/FS-536SD)
[1]
[1]
[2]
[2]
[1]
[1]
[1]
[2] [1]
F PERIODICAL MAINTENANCE > 24. Periodical maintenance procedure FS-536/
5. Remove the exit tray [1].
6. Remove two tabs [1], and remove the cover [2].
7. Release the tab [1], and remove the main tray upper position detect switch
[2].
8. Remove four screws [1], and remove the cover [2].
F-107
FS-536SD