Konica Minolta bizhub C658 Service Manual page 435

bizhub C658/C558/C458/C368/C308/C258
[1] [2]
[1]
11. To reinstall, reverse the order of removal.
6.4.15 IH power supply unit (IHPU)
1. Remove the duct cover.
G.6.2.23 Duct cover/1
G.6.2.24 Duct cover/2, filter assy
2. Remove the toner filter.
F.8.1.1 Replacing the toner filter
3. Remove the lower rear cover.
G.6.2.21 Lower rear cover
4. Remove the scanner left cover.
G.6.2.4 Scanner left cover
5. Remove the scanner rear cover.
G.6.2.1 Scanner rear cover
6. Remove the DF cable cover.
G.6.2.22 DF cable cover
7. Remove the upper rear cover.
G.6.2.25 Upper rear cover
[2] [1]
[1]
[1]
[2]
[2]
[2] [1] [2]
13. To reinstall, reverse the order of removal.
6.4.16 NF board (NFB) (bizhub C658/C558)
1. Remove the duct cover.
G.6.2.23 Duct cover/1
G.6.2.24 Duct cover/2, filter assy
10. Remove three board supports [1], and remove the IH magnetic erasing board
8. Remove seven screws [1], and remove the IH power supply protective shield
9. Disconnect three connectors [1].
10. Remove two solderless terminals [2].
11. Remove two solderless terminals [1].
[3]
12. Remove six screws [2], and remove the IH power supply [3].
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
[2].
[2].
G-135