Konica Minolta bizhub C658 Service Manual page 790

bizhub C658/C558/C458/C368/C308/C258
Key name
Density Adjustment
Image Stabilization
Paper Separation
Adjustment
Color Registration
Adjustment
Gradation Adjustment
Density Balance Adjust *2 Reflect Adj Values
Scanner Area
ADF Adjustment
Line Detection
Trail Edge Adjust
User Paper Settings
Punch Regist Loop Size
Adjustment
Punch Edge Sensor It will be displayed when optional punch kit PK-523 is mounted in finisher FS-537
Adjustment or FS-537SD. *2
Vertical Punch (Z-Fold) It will be displayed when optional Z fold unit ZU-609 and punch kit PK-523 are
Position Adjustment mounted in finisher FS-537 or FS-537SD. *2
Horizontal Punch (Z-Fold)
Position Adjustment
1st Z-Fold Position It will be displayed when optional Z folding unit ZU-609 is mounted in finisher
Adjustment FS-537 or FS-537SD. *2
2nd Z-Fold Position
Adjustment
Post Inserter Tray Size It will be displayed when optional post inserter PI-507 is mounted in finisher
Adjustment FS-537 or FS-537SD. *2
Thick - Yellow -
Thick - Magenta -
Thick - Cyan -
Thick - Black -
Black Image Density -
Image Stabilization Only -
Image Stabilization Setting -
-
Color Registration Adjust This menu is unavailable when the key counter is not inserted while only the key
(Yellow) counter is set to Set by [Service Mode] -> [Billing Setting] ->
Function
Color Registration Adjust
(Magenta)
Color Registration Adjust
(Cyan)
Image Stabilization Only
Printer (600dpi)
Printer (1200dpi)
Copy
-
Select screen -
Initialize Adjustment -
Values
Scanner Adjustment:
Leading Edge
Scanner Adjustment:
Centering
Horizontal Adjustment
Vertical Adjustment
Centering It will be displayed when [Service Mode] -> [Enhanced Security] ->
Feature
Original Stop Position
Centering Auto
Adjustment
Auto Adj. of Stop Position
Prior Detection Setting Be aware that selecting "No" and performing the pre-detection with [Service Mode]
-> [Machine] ->
Feed Cleaning Settings -
-
• It will be displayed when [Service Mode] -> [Enhanced Security] ->
"Level 2."
• The feature available from [Service Mode] -> [System 2] -> [User Paper Settings] is extended to
Administrator. However, the fusing temperature setting is not possible in Administrator Settings.
Function/Precondition
• It will be displayed when optional punch kit PK-520 is mounted in finisher
FS-534 or FS-534SD. *1
• It will be displayed when optional punch kit PK-520 is mounted in finisher
FS-536 or FS-536SD. *2
• It will be displayed when optional punch kit PK-523 is mounted in finisher
FS-537 or FS-537SD. *2
• It will be displayed when optional punch kit PK-519 is mounted in finisher
FS-533. *3
Choice].
• This menu is unavailable when the key counter is not inserted while only the
key counter is set to Set by [Service Mode] -> [Billing Setting] ->
[Management Function Choice].
• Before executing Gradation adjust, be sure to perform Stabilizer.
• It will be displayed when [Service Mode] -> [Enhanced Security] ->
[Administrator Feature Level] is set to "Level 2."
• This menu is unavailable when the key counter is not inserted while only the
key counter is set to Set by [Service Mode] -> [Billing Setting] ->
[Management Function Choice].
• The adjusted values from [Scan Area] are also updated to the service mode
as the " I.5.4.6 Scan Area" function in service mode is opened to
administrators.
Level] is set to "Level 2."
• It will be displayed when [Service Mode] -> [Enhanced Security] ->
[Administrator Feature Level] is set to "Level 2."
• When the adjustment result is [Unable], confirm the orientation of the original
document and manually adjust the [Original Stop Position].
[ADF Scan Glass
I-20
I ADJUSTMENT/SETTING > 2. List of utility mode
[Management
Contamination] will display "NG."
[Administrator Feature
[Administrator
Level] is set to