Konica Minolta bizhub C658 Service Manual page 717

bizhub C658/C558/C458/C368/C308/C258
8.24.8 Tray lift motor /Lw (M202) (PI-507)
1. Remove the transfer motor (M203).
G.8.24.9 Transfer motor (M203) (PI-507)
[2] [3] [2] [1]
[2]
[4 ] [5]
[2]
[1]
[2]
[1]
6. Reinstall the above parts following the removal steps in reverse.
8.24.9 Transfer motor (M203) (PI-507)
1. Remove the post-inserter.
G.8.24.4 Post Inserter (PI-507)
2. Remove the rear cover.
G.8.24.2 Rear cover (PI-507)
[1]
[2]
2. Disconnect the connector [1].
3. Remove four screws [2] and slide the metal plate [3].
NOTE
▪ Place the belt [4] on the gear [5] during installation.
4. Remove the screw [1] and remove the tray lift motor /Lw assy [2].
5. Remove two screws [1] and remove the tray lift motor /Lw [2].
3. Pull the unlock lever [1] and open the upper door [2].
G-417
G DISASSEMBLY/REASSEMBLY > 8. Option