Konica Minolta bizhub C658 Service Manual page 305

bizhub C658/C558/C458/C368/C308/C258
4. Notes when transporting the machine
NOTE
▪ When transporting a machine to reinstall it in another location, attach the following protective materials to the machine in order
to prevent the machine from being damaged or spilling out by vibration during transportation.
▪ The protective materials are removed when the machine is set up. However, be sure to keep the protective materials after
finishing the set-up.
4.1 Protective materials
4.1.1 Protective materials for the photo conductors
Reinstall procedure
1. Open the front door.
2. Remove the waste toner box.
F.7.6.1 Replacing the waste toner box
[1]
4.1.2 Scanner packing bracket
1. Check that the exposure unit is at the home position.
2. Remove four caps.
[1]
[1] [1]
G DISASSEMBLY/REASSEMBLY > 4. Notes when transporting the machine
3. Insert the protective materials for the photo conductors [1] in the indicated
position and push it as far as it will go.
3. Attach the scanner packing brackets [1] to fix the scanner.
G-5