Konica Minolta bizhub C658 Service Manual page 459

bizhub C658/C558/C458/C368/C308/C258
[3]
[1] [2]
[1]
[4] [3]
[2]
[1]
9. To reinstall, reverse the order of removal.
6.7.2 Transfer belt cleaner cooling fan (FM2)
1. Remove the left cover.
G.6.2.16 Left cover
2. Remove the exit cover.
G.6.2.17 Exit cover
3. Remove the DC power supply.
G.6.4.5 DC power supply (DCPU)
4. Remove the upper front door.
G.6.2.12 Upper front door
5. Remove the lower front door.
G.6.2.13 Lower front door
6. Remove the waste toner box.
F.8.7.1 Replacing the waste toner box
7. Remove the front lower cover.
G.6.2.14 Front lower cover
8. Remove the front cover.
G.6.2.15 Front cover
9. Remove the toner cartridge/Y,M,C,K.
F.8.4.1 Replacing the toner cartridge
10. Remove the drum unit/Y,M,C,K.
F.8.2.1 Replacing the drum unit
11. Remove the developing unit.
F.8.3.1 Replacing the developing unit
12. Remove the transfer belt unit.
F.8.5.3 Replacing the transfer belt unit
13. Remove the sub hopper unit.
G.6.3.4 Sub hopper unit
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
4. Disconnect the connector [1].
5. Remove two screws [2], and remove the power supply cooling fan assy [3].
6. Disconnect the connector [1], and remove the harness from the harness guide.
7. Remove the screw [1], and remove the retainer plate [2].
8. Remove the tab [3], and remove the power supply cooling fan [4].
G-159