Konica Minolta bizhub C658 Service Manual page 902

bizhub C658/C558/C458/C368/C308/C258
(b) Procedure
• Up to 15 characters can be used. (alphanumeric characters and symbols)
(c) Default setting
• No
(4) Server for RX-POP3 port number
(a) Use
• To set the POP3 port number used for the CS Remote Care.
(b) Default setting
• 110
(c) Setting range
• 1 to 65535
(5) Receive-E-mail Address
(a) Use
• To set the e-mail address used for the CS Remote Care.
(b) Procedure
• Up to 129 characters can be used. (alphanumeric characters and symbols)
(c) Default setting
• No
(6) Receive-Mail Check
(a) Use
• To set whether or not to use mail check and the time interval for the POP server used for the CS Remote Care.
(b) Default setting
• No
(c) Setting item
• No
• 1 to 120 min.
(7) Receive-Connection Time-out
(a) Use
• To set the timeout period for connection during reception.
(b) Default setting
• 60 Sec
(c) Setting range
• 30 to 300 Sec
(8) Receive-APOP Authentication
(a) Use
• To set whether or not to authenticate the APOP during reception.
(b) Default setting
• No
(c) Setting item
• Yes
• No
(9) Send-SMTP server
(a) Use
• To set the SMTP sever address for transmission used for the CS Remote Care.
• SMTP server address can be set by the IP address or the domain name.
(b) Procedure
<Input IP Address>
• IP address version 4 format [0 to 255].[0 to 255].[0 to 255].[0 to 255]
<FQDN Input>
• Enter the domain name.
I ADJUSTMENT/SETTING > 5. SERVICE MODE
I-132