Konica Minolta bizhub C658 Service Manual page 652

bizhub C658/C558/C458/C368/C308/C258 G DISASSEMBLY/REASSEMBLY > 8. Option
9. NOTE
[1]
▪ For installation of the pantograph, insert three hooks [1] on the
pantograph of the saddle unit into the back holes inside the finisher.
10. Remove the screw [1].
[1]
11. Push back the saddle unit into the position of the illustration, and then remove
the screw [1].
[1]
12. Pull out the saddle unit, and then remove the screw [1].
[1]
13. Insert the rail [1] on the right side into the finisher.
[1]
G-352