Konica Minolta bizhub C658 Service Manual page 694

bizhub C658/C558/C458/C368/C308/C258
[2]
[1]
[3]
[2]
[1] [2]
[3]
[4]
[2]
[1]
[1]
[2] [3]
6. Remove two screws [1], and remove the plate [2].
7. Remove two screws [1].
[1]
8. Detach the board support film [3] from the harness guide tabs [2].
9. Remove the harness from the wire saddle [1].
10. Disconnect the connector [2].
11. Remove four screws [3] and remove the SD control board assy [4].
12. Remove two screws [1], and remove the plate [2].
13. Remove the screw [1].
14. Release two tabs [2], and remove the cover [3].
G-394
G DISASSEMBLY/REASSEMBLY > 8. Option