Konica Minolta bizhub C658 Service Manual page 606

bizhub C658/C558/C458/C368/C308/C258
[1]
[2]
[1]
7. To reinstall, reverse the order of removal.
8.13.2 PK control board (PKCB) (PK-519)
1. Remove the finisher.
G.8.12.4 Finisher (FS-533)
[2]
[1]
[2]
[3] [1]
6. To reinstall, reverse the order of removal.
8.13.3 Punch motor (M201) (PK-519)
1. Remove the finisher.
G.8.12.4 Finisher (FS-533)
5. Disconnect two connectors [1].
6. Remove the screw [1], and remove the punch unit [2].
2. Remove two screws [1], and remove the plate [2].
3. Disconnect two connectors [1].
[4]
4. Remove the screw [2], and pull out the PK control board [3].
5. Disconnect two connectors [4], and remove the PK control board [3].
G-306
G DISASSEMBLY/REASSEMBLY > 8. Option