bizhub C658/C558/C458/C368/C308/C258
3. Remove the tray 2.
G.5.2.24 Tray 2
[1]
[3]
[2]
5. To reinstall, reverse the order of removal.
6. Select [Service Mode] -> [Counter] -> [Life] and clear the count of [2nd.].
7.7.3 Replacing the manual bypass tray feed roller, manual bypass tray separation roller assy
(1) Periodically replacing parts/cycle
• Manual bypass tray feed roller: Every 200,000 counts
• Manual bypass tray separation roller assy: Every 200,000 counts
(2) Procedure
1. Open the right door.
[1]
[2]
[1]
[2]
[1]
F PERIODICAL MAINTENANCE > 7. Periodical maintenance procedure bizhub C368/
[1]
[4]
[3]
4. Remove the C-clip [1] each, and remove the tray 2 feed roller [2], tray 2 pick-
up roller [3] and tray 2 separation roller [4].
2. Remove the screw [1], and remove the feed roller cover [2].
3. Remove the screw [1], and remove the bushing [2] and the metal plate [3].
4. Remove the manual bypass tray feed roller [1].
F-34
C308/C258