Konica Minolta bizhub C658 Service Manual page 348

bizhub C658/C558/C458/C368/C308/C258
[1]
[1]
[1]
[2]
[1]
[1] [2] [1]
15. To reinstall, reverse the order of removal.
[1]
[2]
[2]
G DISASSEMBLY/REASSEMBLY > 5. bizhub C368/C308/C258
11. Remove all connectors and flat cables on the MFP board.
12. Remove six screws [1], and remove the plate [2].
13. Remove the screw [1] and two bolts [2] of the MFP board side panel.
14. Remove 10 screws [1], and remove the MFP board [2].
16. NOTE
▪ After replacing the MFP board (MFPB), transfer EEPROM/1 and
EEPROM/2.
▪ Mark the EEPROMs to before replacing. Mark the EEPROMs to
distinguish old from new, and mark EEPROM/1 and EEPROM/2 to
distinguish from each other.
▪ Marks should be helpful to making easy distinction regardless of the
style of them.
▪ When replacing EEPROM/1 [1], EEPROM/2 [2], replace them one at a
time to prevent a mix-up in the device positions.
▪ When mounting EEPROM , align the notches (indicated by "A" in the
illustration).
G-48