Konica Minolta bizhub C658 Service Manual page 537

bizhub C658/C558/C458/C368/C308/C258
[2]
[1]
8. To reinstall, reverse the order of removal.
8.5.8 PC control board (PCCB) (PC-110/PC-210)
1. Remove the rear cover.
G.8.5.3 Rear cover (PC-110/PC-210)
[2] [1]
[1]
4. To reinstall, reverse the order of removal.
8.5.9 Tray 3 paper empty indicator board (PEIB/3), tray 4 paper empty indicator board (PEIB/4) (PC-110/PC-210)
NOTE
▪ The tray 3 paper empty indicator board and the tray 4 paper empty indicator board are of the same form and mechanism. This
procedure shows the steps taken for the tray 3 paper empty indicator board.
1. Slide out the tray 3.
2. Slide out the tray 4.
[1]
[1]
[2] [3]
[1]
6. To reinstall, reverse the order of removal.
8.5.10 Tray 3 FD paper size board (FDPSB/3), tray 4 FD paper size board (FDPSB/4) (PC-110/PC-210)
NOTE
▪ The tray 3 FD paper size board and the tray 4 FD paper size board are of the same form and mechanism. This procedure shows
the steps taken for the tray 3 FD paper size board.
1. Remove the tray 3.
G.8.5.4 Tray 3, tray 4 (PC-110/PC-210)
2. Remove the tray 4.
G.8.5.4 Tray 3, tray 4 (PC-110/PC-210)
[1]
[2]
7. Remove four screws [1], and remove the tray 4 paper feed unit [2].
2. Disconnect all connectors on the PC control board.
3. Remove four screws [1], and remove the PC control board [2].
3. Remove four screws [1], and remove the right front cover [2].
4. Disconnect the connector [1].
5. Remove the screw [2], and remove the tray 3 paper empty indicator board [3].
G-237
G DISASSEMBLY/REASSEMBLY > 8. Option