Konica Minolta bizhub C658 Service Manual page 417

bizhub C658/C558/C458/C368/C308/C258
F.8.1.1 Replacing the toner filter
5. Remove the lower rear cover.
G.6.2.21 Lower rear cover
6. Remove the scanner left cover.
G.6.2.4 Scanner left cover
7. Remove the scanner rear cover.
G.6.2.1 Scanner rear cover
8. Remove the DF cable cover.
G.6.2.22 DF cable cover
9. Remove the upper rear cover.
G.6.2.25 Upper rear cover
10. Remove the paper cooling fan assy.
G.6.7.7 Paper cooling fan (FM8)
11. Remove the toner cartridge cooling fan assy.
G.6.7.5 Toner cartridge cooling fan (FM4) (bizhub C458)
12. Remove the protective shield.
G.6.2.26 Protective shield
13. Open the PWB box/1.
G.6.3.9 How to open the PWB box/1
14. Remove the expansion control board.
G.6.4.12 Expansion control board (EXCB)
15. Remove the fusing motor.
G.6.5.3 Fusing motor (M3)
16. Remove the fusing pressure motor.
G.6.5.15 Fusing pressure motor (M11)
[1]
[2]
[1]
[1]
[2] [3]
[1]
[1] [2]
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
17. Remove the harness from the edge cover [1], and disconnect two connectors
[2].
18. Remove four screws [1], the ground terminal [2], and remove the plate [3].
19. Remove four screws [1], and remove the plate [2].
G-117