Konica Minolta bizhub C658 Service Manual page 490

bizhub C658/C558/C458/C368/C308/C258
G.7.2.2 Rear cover (dual scan document feeder)
[1] [3]
[2]
[2]
[1]
[2]
[1]
[2]
[1]
7. To reinstall, reverse the order of removal.
7.2.21 Back side cleaning motor (M7) (dual scan document feeder)
1. Remove the rear cover.
G.7.2.2 Rear cover (dual scan document feeder)
[1]
[3]
[2]
4. To reinstall, reverse the order of removal.
G DISASSEMBLY/REASSEMBLY > 7. Dual scan document feeder
2. Disconnect the connector [1].
3. Remove the harness [3] from three wire saddles [2] and the harness guide.
4. Remove four screws [1] and remove the reading roller pressure/retraction
motor assy [2].
5. Disconnect the connector [1] and remove the reading roller pressure/retraction
motor assy [2].
6. Remove two screws [1] and remove the reading roller pressure/retraction
motor [2].
2. Disconnect the connector [1].
3. Remove two crews [2] and remove the back side cleaning motor [3].
G-190