Konica Minolta bizhub C658 Service Manual page 441

bizhub C658/C558/C458/C368/C308/C258
[1]
[1]
[3]
[2]
[1]
[2]
[1]
7. To reinstall, reverse the order of removal.
6.5.6 Toner supply motor/K (M6)
1. Remove the upper front door.
G.6.2.12 Upper front door
2. Remove the lower front door.
G.6.2.13 Lower front door
3. Remove the waste toner box.
F.8.7.1 Replacing the waste toner box
4. Remove the front lower cover.
G.6.2.14 Front lower cover
5. Remove the front cover.
G.6.2.15 Front cover
6. Remove the toner cartridge.
F.8.4.1 Replacing the toner cartridge
7. Remove the drum unit.
F.8.2.1 Replacing the drum unit
8. Remove the developing unit.
F.8.3.1 Replacing the developing unit
9. Remove the exit cover.
G.6.2.17 Exit cover
10. Remove the sub hopper unit.
G.6.3.4 Sub hopper unit
[2]
[4]
G DISASSEMBLY/REASSEMBLY > 6. bizhub C658/C558/C458
3. Remove seven screws [1], and remove the belt [2].
4. Disconnect two connectors [1], and remove the harness from the edge cover
[2] and the wire saddle [3].
5. Remove the plate [4].
6. Disconnect the connector [1], and remove the ADU transport motor [2].
G-141