Konica Minolta bizhub C658 Service Manual page 670

bizhub C658/C558/C458/C368/C308/C258
4. Remove the stapler movement motor assy
G.8.19.30 Stapler movement motor (M19) (FS-537/FS-537SD)
[3] [4]
[1] [2]
[2]
[1]
[1]
[1]
[2]
5. Rotate the stapler transfer dial [1] until the stapler [2] has been moved to the
location shown in the figure (the location where the back-end stopper [3] does
not interact with the clincher staple arm [4]).
6. Disconnect two connectors [1] and remove the harness from seven wire
saddles [2].
7. Remove the harness from the wire saddle [1].
8. Remove two screws [1] from the front of the finisher and one screw [2] from the
back of the finisher.
G-370
G DISASSEMBLY/REASSEMBLY > 8. Option