Konica Minolta bizhub C658 Service Manual page 230

bizhub C658/C558/C458/C368/C308/C258
8.5 1st transfer section
8.5.1 Cleaning of the image transfer entrance guide
(1) Periodically cleaning parts/cycle
• Image transfer entrance guide: Every 240,000 counts or when the transfer belt unit is replaced.
(2) Procedure
1. Remove the transfer belt unit.
F.8.5.3 Replacing the transfer belt unit
[1]
8.5.2 Cleaning of the IDC sensor window
(1) Periodically cleaning parts/cycle
• IDC sensor window: Every 240,000 counts or when the transfer belt unit is replaced.
(2) Procedure
1. Remove the transfer belt unit.
F.8.5.3 Replacing the transfer belt unit
F PERIODICAL MAINTENANCE > 8. Periodical maintenance procedure bizhub C658/
[1] 1. Remove the new toner cartridge [1] from its packaging, and the shake the
2. Insert the toner cartridge [1] into the machine.
[1]
3. Completely insert the toner cartridge into the machine and turn it in the
2. Wipe the image transfer entrance guide [1] clean of spilled toner and dirt
cartridge side to side 5 to 10 times.
NOTE
▪ Shake the toner cartridge well.
If shaking is not enough, that may cause trouble.
NOTE
▪ Make sure that the toner cartridge is the same color as the label in
the cartridge compartment.
▪ Make sure that the blue label position of the toner cartridge is
matched with the one of the machine side.
direction as shown in the illustration in order to fix the toner cartridge.
using a cleaning pad with water or alcohol.
F-42
C558/C458