Konica Minolta bizhub C658 Service Manual page 582

bizhub C658/C558/C458/C368/C308/C258
[2]
[1]
8.10.10 Lift wire (LU-302)
(1) Removal
1. Remove the right cover.
G.8.10.2 Right cover (LU-302)
2. Remove the front cover.
G.8.10.3 Front cover (LU-302)
3. Remove the rear cover.
G.8.10.4 Rear cover (LU-302)
[1]
[2]
[3] [2] [1]
[4] [5]
[1] [3]
[4] [2]
3. Remove four screws [1] and remove the dehumidification heater [2].
4. Remove the harness from two wire saddles [1], and disconnect the
connector [2].
5. Remove the harness from the wire saddle [1], and disconnect the connector
[2].
6. Remove the harness from the wire saddle [3], and disconnect the connector
[4].
7. Remove the harness from the wire saddle [5].
8. Remove the harness from the wire saddle [1].
9. Remove the screw [2], and remove the ground terminal [3].
10. Disconnect the connector [4].
G-282
G DISASSEMBLY/REASSEMBLY > 8. Option