Konica Minolta bizhub C658 Service Manual page 688

bizhub C658/C558/C458/C368/C308/C258
[1]
[1] [3]
[2]
6. Reinstall the above parts following the removal steps in reverse.
8.19.31 FNS entry transport motor (M20) (FS-537/FS-537SD)
1. Remove the rear cover.
Rear cover (FS-537/FS-537SD)
[2] [1] [2]
[2] [3] [2]
[1]
[1]
[1]
[2]
4. Remove the E-ring [1].
5. Remove the gear [1] and pin [2], then remove the stapler movement motor [3].
2. Disconnect the connector [1].
3. Remove four screws [2], and remove the FNS entry transport motor assy [3].
4. Remove four screws [1] and remove the metal plate [2].
5. Remove the E-ring [1].
G-388
G DISASSEMBLY/REASSEMBLY > 8. Option