Konica Minolta bizhub C658 Service Manual page 933

bizhub C658/C558/C458/C368/C308/C258
5.16.31 Driver Install
NOTE
Only when one of the following conditions is met, the driver can be installed/uninstalled.
• [Administrator Settings] -> [Security Settings] -> [USB Connection Permission settings] -> [Detail Setting] -> [External Memory
(Service)] -> [Storage data backup] is set to [Allow].
• [Administrator Settings] -> [Security Settings] -> [USB Connection Permission settings] -> [Detail Setting] -> [External Memory
(Service)] -> [FW Update] is set to [Allow].
• [Administrator Settings] -> [Security Settings] -> [Enhanced Security Mode] is set to [OFF].
(1) Use
• To install/uninstall the loadable device driver.
• Used when the authentication device that needs the loadable device driver (include AU-102 and AU-201S) is attached.
(2) Procedure (Install)
1. Prepare a USB memory where only the loadable device driver is stored in the ROOT directory. (Only one loadable device driver must be
stored in the USB memory, and please do not save any other data in the USB memory.)
2. Connect the USB memory to the USB port of the MFP.
3. Call the Service Mode to the screen.
4. Touch [System 2] -> [
5. Touch [Loadable Driver] and touch [Start] to install the data.
6. Check that data is normally installed from the message that appears on the control panel.
7. Turn OFF the main power switch.
8. Remove the USB memory.
(3) Procedure (Uninstall)
1. Call the Service Mode to the screen.
2. Touch [System 2] -> [
3. Select a driver to be uninstalled.
4. Touch [Start] to uninstall the data.
5. Check that data is normally uninstalled from the message that appears on the control panel.
6. Turn OFF and ON the main power switch.
5.16.32 Application Change Setting
(1) Use
• To set whether to allow a change of the settings for the specified application start.
(2) Default setting
• Permit
(3) Setting item
• Permit
• Prohibit
• If "Permit" is set, [Specified Application Start Setting] of the administrator settings can be configured.
5.16.33 Custom Pattern
NOTE
In the following conditions, installation of the custom pattern is prohibited.
• [Administrator Settings] -> [Security Settings] -> [USB Connection Permission settings] is set to [Restrict].
• [Administrator Settings] -> [Security Settings] -> [USB Connection Permission settings] -> [Detail Setting] -> [External Memory
(Service)] is set to [Restrict].
• [Administrator Settings] -> [Security Settings] -> [Enhanced Security Mode] is set to [ON].
(1) Use
• To register or delete custom patterns.
• To customize the panel display by allowing MFP to read the setting file (CPD file) that defines whether or not to display the various
setting keys that appear on the control panel.
• When making the setting file (CPD file), use the "Panel Customization Tool."
(2) Panel customization tool
(a) System requirement
PC PC-AT compatible machine
CPU Conforms to the specifications of the operating system
Memory (RAM) Conforms to the specifications of the operating system
HDD 100 MB or more free space is required
Display 1280 x 800 pixels or more, 24bit full color
OS • Windows 7 Professional (SP1 or later)*
* 32-bit (x86) and 64-bit (x64) editions of Windows are supported.
(b) Operation procedures
When creating a new display setting file (CPD file):
] -> [Driver Install] -> [Install].
] -> [Driver Install] -> [Uninstall].
I ADJUSTMENT/SETTING > 5. SERVICE MODE
I-163