Konica Minolta bizhub C658 Service Manual page 659

bizhub C658/C558/C458/C368/C308/C258
[2]
[3] [1]
[2]
[1]
[1]
[2]
7. To reinstall, reverse the order of removal.
8.17.13 Tri-folding guide motor (M8) (FS-536SD saddle section)
1. Remove the saddle unit.
Saddle unit (FS-536SD)
2. Remove the front cover.
G.8.17.1 Front cover (FS-536SD saddle section)
[2]
[3] [1]
5. To reinstall, reverse the order of removal.
8.17.14 Center fold knife motor (M9) (FS-536SD saddle section)
1. Remove the saddle unit.
3. Disconnect the connector [1].
4. Remove two screws [2], and remove the SD paddle motor assy [3].
5. NOTE
▪ When reinstalling the belt, align the portions of the gear [1] and the
gear [2] indicated in the illustration with the triangular marking on
the metal plate. Then, install the belt.
6. Remove two screws [1], and remove the SD paddle motor [2].
3. Disconnect the connector [1].
4. Remove two screws [2], and remove the tri-folding guide motor [3].
G-359
G DISASSEMBLY/REASSEMBLY > 8. Option