Table of Contents
Advertisement
The mainboard of the COMmander Basic contains the power supply
unit and five slots for different modules. Besides this you will find the
serial interface and different buttons and LEDs that will be explained in
the following.
autom. SW-Update
Reset
COMmander Basic
Pic. 8: Mainboard of the COMmander Basic
Button for automatic PBX software update.
LED for automatic PBX software update.
Button for hardware reset.
Module slot A for 8a/b or 4S
Module slot B for 8a/b or 4S
Module slot C for 8a/b or 4S
Module slot D for 8a/b or 4S
Module slot E for 2TSM analog module.
Description of the Mainboard
LED
1 2
Mainboard
module.
0
module.
0
module.
0
module.
0
Preparations, Installation of the Case
The plastic cover over the power supply unit is a contact
safety device against dangerous voltage and must not be
e
removed.
10/16
100/50
10/16
94bv4
gn
br ws
V.24 /RS - 232 C
gn/gb
PE
Plug for case LED.
Serial interface for computer/printer connection
(3-pole clamp bloc).
Serial interface for computer/printer connection
(10-pole plug for the connection of the case sleeve).
Clamp for unfused earth conductor.
Mains connection.
Contact safety device.
br
bl
N
L
Netz 230V 50Hz
15
Advertisement
Table of Contents
