Auerswald ISDN Installation And Configuration Manual page 38

38
Creating a Basic Configuration
Now click on „call distribution ... external -> subscribers" in the left
window pane. You can define the distribution of external calls to
individual internal subscribers in this table (the exchange line num-
bers are listed top to bottom and the internal numbers are listed left
to right). Click on the coloured buttons „immediately" or „delayed"
first and then into the fields to be modified.
If internal numbers and external Direct Dial Inward numbers (DDIs)
are matching, you can create a 1:1 assignment with the „linear call
distribution". If you have received the Direct Dial Inward numbers -
40 to -59 for your PTP-connection and created the same numbers
40 to 59 in the window „internal numbers", you can assign the cor-
responding internal number to each external DDI by clicking on the
button „linear call distribution".
You have defined a basic configuration now which enables you to
make and receive calls. This configuration has to be stored into the
PBX. Click on the button „Save" and then on „PBX".
For backup purposes you can save this configuration to disk by
clicking on „Save" and then „File".
If you stored the configuration into the PBX and saved it to a file
(optional), you may close the configuration (click „File" and „Close")
or leave the PC program (click „File" and „Quit"). In both cases you
are asked if you like to save your changes. If this has already been
done, select „no".