Table of Contents
Advertisement
Now click on „exchange line numbers" in the left window pane. The
window content appearing is dependent the kind of connection
(Point-to-point
connection,
mixed).
You have to enter the country code and area code into entry fields
at the top of the window.
Point-to-Point connection: In case of a Point-to-Point connection
(a base number with additional Direct Dial Inward numbers) you
have to enter your base number without area code into the column
„PTP base number" of the first table.
If you have multiple ISDN exchange lines with the same base
number, please enter these separately and activate both check
boxes in the column „bundle".
(The reception number, e.g. „0", is not part of the base number, but
is a Direct Dial Inward number.)
The Direct Dial Inward numbers received from the network provider
are entered into the column „MSN/DDI" of the following table.
you have the Direct Dial Inward number block 1-99 and use the 1,
the numbers 10-19 are not available anymore) Assign an S
each number by activating a check box in the column „S
you have a trunk bundle both columns are activated simultane-
ously.)
Example:
05306 / 9200 - 0
area code
Point-to-Multipoint connection: In case of one or more Point-to-
Multipoint connections you have to enter your MSNs without area
code into the column „MSN/DDI". Assign an S
by activating a check box in the column „S
Now click on „internal numbers" in the left window pane. You can
create internal subscribers in this table by entering the number and
assigning this number to a port (module slot A-D in the column
„slot", select port number in the column „internal port" and type of
device in the corresponding column).
The two-digit numbers 10-59 and the three-digit numbers 100-599
are available. The usage of two-digit numbers reduces the available
amount of three-digit numbers. Example: If the number 11 is
assigned, the numbers 110-119 (Emergency numbers!) are not
available anymore.
The program can also generate a rising list of numbers (enter the
smallest number, step into the name entry field to the right with the
right arrow-key and start the function by clicking the right mouse
key).
The 1st MSN entered into individual Auerswald system tele-
phones, ISDN telephones as well as ISDN PC-controllers
must match with here created internal number (Please con-
sult the user manual of the corresponding device; besides this make
sure that this 1st MSN of the corresponding device is also presented to
the PBX).
Point-to-multipoint
connection
port to
0
1, ...". (If
0
base number
DDI number
port to each number
0
1", „S
2"...).
0
0
or
(If
37
Commissioning
PTP connection
PTMP connection
Advertisement
Table of Contents
