Table of Contents
Advertisement
48
Music on Hold and Music on Hold-Announcement
In case of a transfer or Query the calling partner waiting in the back-
ground will hear a Music on Hold with an optional announcement over-
lay played by the PBX. The input for external Music on Hold is the audio
input of a COMmander 2TSM analog module (see also
internal Music on Hold is stored in the PBX, but can be overwritten by
e.g. a recorded song via the audio input.
You can connect the system telephones COMfort 1000, 1200 and 2000,
COMfort DECT 800 or smar-tel-i (Auerswald accessory) to the internal
S
port of your PBX. The configuration of these telephones can be made
0
with the PC program COMfort Set or smar-tel-i configuration. The set-
tings for the COMfort DECT 800 are made in the menu of the telephone.
The PBX makes it possible that some functions with the configuration
program COMset are differently configured e.g. for day, night, holiday
and lunch break. Up to a maximum of 6 different configurations are sup-
ported. The following functions are dependent on the configuration:
Exchange line authorizations
External and door call distribution
External call forwarding from door terminal
Connection without dialling (Automatic dialling)
Follow-me
Internal dialling tone
Number presentation
Subscriber-/group-call forwarding
Preferred exchange line
Second Ringer Bell
The switching from one configuration to another can be done by time
automation controlled by the internal clock of the PBX or via telephone
(manually)
(page 23 in the user
lowing settings have to be done in COMset for the use of the configura-
tion:
For the system display SD-420 (Auerswald accessory) connected to the
PBX three different operation modes can be selected in COMset:
Operation Mode „Subscriber Display" 1 and 2
Operation Mode „Reception" 3
Music on Hold and Music on Hold-Announcement
page
52). The
Configure the System Telephones
Use different PBX Configurations (Day, Night etc.)
manual). To use configurations the fol-
Configure the System Display SD-420
The Music on Hold and announcement functions can be configured via
telephone
(page 43 in the user
Hold.
First you have to create the necessary number (up to 6) of configura-
tions. The here listed stated functions can be configured depending on
the configurations.
The time automated switching has to be switched on the switching
times for each day of the week must be entered (up to 10). The activa-
tion of the automatic configuration switching is also possible via tele-
phone
(page 24 in the user
manual).
If you want to use manual switching, the authorization has to be
assigned to individual subscribers.
After a power failure the time information is lost. In this case
automatic switching and the Wake-up function will not be per-
formed. After adjusting the time by the programming
sequence on
page 47 in the user manual
the functions will be active again (you can configure in COMset an auto-
matic call to a number e.g. your own number for this purpose).
You can switch and monitor the configurations with comfort on a system
telephone. (see manual of the telephone).
manual) or with COMtools Music on
or by an outgoing external call
Advertisement
Table of Contents
