Chapter 3 - Basic Operation; Basic Operation; Main User Interface - Thermo Scientific SlideMate AS Operator's Manual

Chapter 3 – Basic Operation

Basic Operation

Main User Interface

The printer is now ready to print slides. The default Template is displayed which has three fields.
Tape Level
A
This tells the user how much tape is left before it
needs replacing.
Printer Status
B
Displays what the current status of the printer is.
Scanned Data
C
Shows the information that has been scanned by
the printer.
Template
D
Shows the data that will be printed on the slide.
To edit you touch the middle of the template.
Eject Button
Pressing the clear part of the slide will initiate a
E
slide eject sequence? If a hopper is attached it
will initiate a print sequence.
Setup
F
Opens the administration menus
Create Sequences
G
See – Creating sequence of slides
Open Protocol
H
See – Selecting a protocol and saving a protocol
Increment / Decrement
I
The up and down arrows increases and decreases
an incremental field.
Status Bar
J
Displays status information.
A83910100 Issue 1
23