Accessing The Remote Site - Nortel NAC User Manual

Remote supervisor login

Accessing the remote site

Accessing the remote site
Introduction
Before you begin
Logging in to the
remote site
Standard 1.0
This section describes how to use NAC to remotely log in to and
out of the Meridian MAX.
To log in to Meridian MAX, you need a Meridian MAX
supervisor ID (and possibly a password). Although it is not
mandatory, it is recommended that a unique supervisor
definition be created for you in Meridian MAX. In this
definition, you are supplied with a supervisor ID and a unique
password. If a definition is not created, you need to use the
identification number of an existing supervisor.
For more information on supervisor definitions, refer to the
Network Administration Center (NAC) 2 Supervisor's User
Guide (P0724352), "Parameter Administration" chapter,
"Supervisor Definition" section.
To log in to a remote site, follow these steps.
Starting Point: NAC 2.5 supervisor workstation
Step Action
1 Complete the procedure described in "Entering the phone
number" on page 109.
2 Display the NAC 2.5 main menu.
Network Administration Center
User Guide Supplement
111
November 1998