Nortel NAC User Manual page 61

50
Standard 1.0
Step Action
8 In the NAC Default Router/Gateway Address field, enter the
default router address for NAC 2.5.
You must enter the default router/gateway address in the
format of N1.N2.N3.N4. N1 is between 0 and 233 (inclusive but
excluding 127). N2 and N3 are between 0 and 255 inclusive.
N4 is between 0 and 254 inclusive.
To use the system default, enter Default.
9 Press PF1 to display the Commands menu.
10 Select "Save changes and exit."
The changes take effect after you restart NAC 2.5.
11 Refer to "Configuring MTE" on page 51 for instructions on how
to configure the MTE 9 to work with NAC 2.5.
Network Administration Center 2.5
User Guide Supplement
Using the Meridian Terminal Emulator
Connecting through a LAN connection
November 1998