Nortel NAC User Manual page 106

Configuring 10+ nodes
Configuring the nodes
Standard 1.0
Step Action
5 Find the node that you want to delete.
Note: This is the node you identified in "Identifying nodes to be
reassigned" on page 87 and "Identifying node numbers" on
page 89.
6 On a piece of paper, copy the information that corresponds to
the node to be deleted.
Note: You need to make note of this information because you
must reinsert it later. From the sample screen, you make note
of the information that corresponds to Node 500 or Node 666.
Both nodes contain Meridian MAX 9 (or higher) applications.
7 Delete the node.
Note: In the sample screen, you delete Node 500 or
Node 666 because they both contain Meridian MAX 9 (or
higher) applications.
8 Complete an entry for the new node that contains the Meridian
MAX 8 (or lower) application.
9 Press PF1 to display the Commands menu.
Network Administration Center
User Guide Supplement
95
November 1998