Nortel NAC User Manual page 105

94
Defining the new
node
Standard 1.0
To configure the new node, you must delete one of the existing
nodes assigned to a Meridian MAX 9 (or higher) application.
Next, you add the new node and reinsert the node you
previously deleted. This allows the new node that contains the
Meridian MAX 8 (or under) application to be assigned to one of
the first 10 nodes.
To configure the node, follow these steps.
Starting Point: NAC 2.5 maintenance console
Step Action
1 Complete the steps described in the previous procedure
("Assigning the ports" on page 91).
2 Display the NAC Maintenance and Administration menu.
3 Select Configure NAC System.
Result: The Configure NAC System menu appears.
4 Select Network Definition.
Result: The NAC Network Definition/Installation screen
appears.
Note: For more information on this screen, refer to the Network
Administration Guide (NAC) System Administration and
Maintenance Guide (NTP 553-4011-510), "Maintenance and
administration programs: system shutdown" chapter, "Network
Definition" section.
Network Administration Center
User Guide Supplement
Configuring 10+ nodes
Configuring the nodes
November 1998