Nortel NAC User Manual page 33

22
Diagram of the
MVME332XTS and
MVME332XT cards
NAC 2.5
application
module
installation
Standard 1.0
The following diagram shows the LED locations for the
MVME332XTS and MVME332XT cards.
MVME332XTS
Faceplate view
Once you obtain your NAC 2.5 system, you must install the
application module into your Application Equipment Module
(AEM). The MVME332XTS/XT card is pre-installed in the
application module.
For more information on how to install the NAC 2.5 application
module, refer to the Network Administration Center (NAC)
Installation Guide (NTP 553-4011-110), "Hardware
installation" chapter, "NAC application module installation"
section.
The handling instructions for the MVME332XTS card are
identical to the instructions for the MVME332XT card.
Network Administration Center
User Guide Supplement
Using the MVME332XTS or MVME332XT card
MVME
332XTS
FAIL HALT
MVME332XT
Faceplate view
Preparing the system
MVME
332XT
FAIL
HALT
RUN
G101083
November 1998