Nortel NAC User Manual page 16

What's new in NAC 2.5
New features in NAC 2.5
Standard 1.0
Note: If NAC 2.5 is monitoring a Meridian MAX 8 (or lower)
node, the network link should configure up to 9600 baud.
NAC supervisors can configure a modem or direct network link
connection with this new speed on any of the serial ports. The
new speed improves the response time for network operations
sent over the network link.
The network link is assigned on the NAC Communication Port
Assignment screen. For more information on this screen, refer
to the Network Administration Centre (NAC) Installation Guide
(NTP 553-4011-110), "Maintenance and administration system
shutdown" chapter, "Configure NAC System" section.
Network Administration Center
User Guide Supplement
5
November 1998