Nortel NAC User Manual page 44

Configuring the modems
Network link
Standard 1.0
Step Action
8 Type AT&Z1=####### followed by Enter.
Result: The system responds with OK.
Note: The "#######" represents the telephone number for the
Meridian MAX node.
9 Type ATE0 followed by Enter.
Result: The system responds with OK.
10 Type AT&W1&Y1 followed by Enter.
Note: This command does not appear on the screen.
Result: The system responds with OK.
11 Power off the modem.
12 Configure the modem's switch settings to match the settings in
the following diagram.
Phone jacks
13 Disconnect the modem from the workstation.
Network Administration Center
User Guide Supplement
Dip switches Serial port interface
1 2 3 4 5 6 7 8
Black =
switch position
(up or down)
1 2 3 4 5 6 7 8
33
Power
G100426
November 1998