Connecting Through A Lan Connection - Nortel NAC User Manual

48

Connecting through a LAN connection

Introduction
NAC 2.5 and LAN
connectivity
Configuring the
LAN connection
Standard 1.0
This section describes how to configure NAC 2.5 to work with
MTE 9 through a LAN connection.
NAC 2.5 provides Ethernet LAN connectivity for supervisor
workstations through the industry standard TCP/IP protocol.
To configure the LAN connection, follow these steps.
Starting Point: NAC 2.5 maintenance console
Step Action
1 Verify that the NAC 2.5 system is shut down.
Note: For instructions on how to shut down the system, refer to
the Network Administration Center System Administration and
Maintenance Guide (NTP 553-4011-510), "Maintenance and
administration programs: system running" chapter.
2 Display the NAC Maintenance and Administration menu.
3 Select Configure NAC System.
Result: The Configure NAC System screen appears.
4 Select System Parameters.
Result: The NAC System Parameters screen appears.
Network Administration Center 2.5
User Guide Supplement
Using the Meridian Terminal Emulator
Connecting through a LAN connection
November 1998