Downloading The Report - Nortel NAC User Manual

Saving to a file

Downloading the report

Downloading the report
Introduction
Setting the
terminal settings
Preparing the file
Standard 1.0
You must have a terminal emulation package, such as MTE 9,
or a capturing software program on your workstation to
download the data stream report from the NAC 2.5 into your
third-party software application.
Note: For more information on how to use MTE 9 to save a
report, refer to the MTE User Guide (P0881398), "Saving to a
file" chapter, "To save to a file with data stream reporting"
section.
The terminal settings within the terminal emulation package
should be
• 9600 baud rate
• 8 data bits
• no parity
• 1 stop bit
• VT-52 or V-100 terminal emulation
You should mark the receiving data file with a ".txt" extension
for easy identification and processing. Refer to the
documentation from your capturing software program for
instructions on how to download a file.
Once you have downloaded the file, you can import it into
applications such as databases and spreadsheets.
Network Administration Center
User Guide Supplement
61
November 1998