Nortel NAC User Manual page 101

90
Standard 1.0
Step Action
3 Select View NAC Error Log.
Result: The NAC error log messages appear.
Note: For more information on how to view the error log, refer
to the Network Administration Guide (NAC) System
Administration and Maintenance Guide (NTP 553-4011-510),
"Maintenance and administration programs: system running"
chapter, "Diagnostics" section.
Note: For more information on the error messages, refer to the
Network Administration Guide (NAC) System Administration
and Maintenance Guide (NTP 553-4011-510), "NAC error
messages".
4 In the error log, find the nodes that correspond to the ones you
identified on the Network Definition screen in the previous
procedure.
This is a sample of two informational error messages:
INFORMATION:
PROGRAM:
INFORMATION:
PROGRAM:
Note: The Program field in the sample message indicates that
Node 500 is assigned to the first node (naclink1), and
Node 666 is assigned to the 10th node (naclink10). On the
Network Definition screen in the previous procedure, both of
these nodes contain Meridian MAX 9 (or higher) applications.
5 Take note of the node numbers that correspond to the first 10
nodes.
Network Administration Center
User Guide Supplement
Node 500 is initialization in
progress.
naclink1
Node 666 is initialization in
progress.
naclink10
Configuring 10+ nodes
Configuring the nodes
November 1998