Table of Contents
Advertisement
Configuring 10+ nodes
Configuring the nodes
Standard 1.0
Step Action
7
From the pop-up menu, select Network Link.
Result: The entry appears in the Device field.
8
In the Connect field, press PF2 and select Direct or Modem.
Note: If you select Modem, you must also enter a value in the
Baud field.
9
In the Name/Comment field, enter the appropriate information,
if desired.
10
Press PF1 to display the Commands menu.
11
Select "Save changes and exit."
12
Follow the steps described in the next procedure ("Defining the
new node" on page 94) to continue the configuration process.
Network Administration Center
User Guide Supplement
93
November 1998
Advertisement
Chapters
Table of Contents
