Nortel NAC User Manual page 18

What's new in NAC 2.5
Additional software codes
New software
installation code
Standard 1.0
In NAC 2.5, the new software installation code appears as
follows:
***> Configuring port devices...(TIME)
***> Finished configuring port devices.(TIME)
If you are completing reentry point 2, 3, or 4, the following
message appears:
port_hold started.
Transport Provider daemon started.
Internet services provided.
portmap started.
Stream Error logging started.
netspec "tcpip" not set up.
Network Commands: rwalld
routed started.
NFS Startup...
ONC daemons:
NFS daemons:
Lock manager:
NFS Startup complete.
Line printer scheduler started.
Module ID = NAC00
Network Administration Center
User Guide Supplement
7
November 1998