Nortel NAC User Manual page 60

Using the Meridian Terminal Emulator
Connecting through a LAN connection
Standard 1.0
Step Action
5 In the NAC Hostname field, enter the host name for this node.
The host name can be up to eight characters. It must start with
a letter and contain only letters, numbers, an underscore, or a
dash. The default is NAC00.
6 In the NAC IP Address field, enter the IP address for the
NAC 2.5.
You must enter the IP address in the format of N1.N2.N3.N4.
N1 is between 0 and 223 (inclusive but excluding 127). N2 and
N3 are between 0 and 255 inclusive. N4 is between 0 and 254
inclusive.
7 In the NAC Subnet Mask field, enter the subnet mask for the
NAC 2.5.
You must enter the subnet mask in the format of N1.N2.N3.N4.
The numbers can range between 0 and 255 inclusive.
To use the system default, enter Default.
Network Administration Center
User Guide Supplement
49
November 1998